Fireplaces & Stoves
4VP-24, 4" x 24", Pellet Stove Pipe, Type L Vent, Tested & Listed To UL-641 Standard & UL-103 Standard, Proven Coupling Joint Connects In Seconds To Assure Joint Integrity, Gasketed Joint Design, Double Wall Design With 1/4" Airspace, Inner Wall 304 Stainless Steel, Outer Wall Paintable Galvanized, Rolled Over Male End Eliminates Sharp Edges, 1" Clearance To Combustibles.
4VP-36, 4" x 36", Pellet Stove Pipe, Type L Vent, Tested & Listed To UL-641 & UL-103 Standard, Proven Coupling Joint Connects In Seconds To Assure Joint Integrity, Gasketed Joint Design, Double Wall Design With 1/4" Airspace, Inner Wall 304 Stainless Steel, Outer Wall Paintable Galvanized, Rolled Over Male End Eliminates Sharp Edges, 1" Clearance To Combustibles.
4VP-WZAJ12, 4" x 12", Adjustable Pellet Stove Pipe, Type L Vent, Gives Installer The Ability To Add From 2-1/2" Length To A Maximum Of 10-1/2" When Slid Over Another Piece Of Type L Pellet Pipe, Proven Coupling Joint Connects In Seconds To Assure Joint Integrity, Gasketed Joint Design, Double Wall Design With 1/4" Airspace, Inner Wall 304 Stainless Steel, Outer Wall Paintable Galvanized, Rolled Over Male End Eliminates Sharp Edges, 1" Clearance To Combustibles.
4VP-90, 4", 90 Degree Elbow, Type L Pellet Vent, Used To Orient Pipe Between Vertical & Horizontal Orientation, Factory Sealed At Couplers To Prevent Leakage, Fixed Elbow, Improved Performance & Nicer Seams.
4VP-TS, 4", Pellet Vent Tee, With Tee Cap, Type L Pellet Vent, Tee Cap Can Be Removed For Inspection & Clean Out, Used To Transition From Horizontal To Vertical Orientation, Provides Easy Access For Inspection & Maintenance.
4VP-WT, 4", Pellet Wall Thimble, Type L Pellet Vent, Must Be Used For All Thru The Wall Installations Involving Combustible Construction, Maintains Airspace Clearance, Centers Pipe Between Walls, Telescopic Design Can Be Used On Standard Walls 5" To 9" Thick.
4VP-AF, 4", Adjustable Pellet Flashing, Type L Pellet Vent, Flashings Provide A Transition At The Roof Through Which The Vent Will Pass, Designed For Roofs Having A Slope Of 0/12 Flat To 6/12, Used To Waterproof Installations That Penetrate The Roof Line.
DSP6DK-1, 6" Damper Kit, Allows The Operator To Alter The Amount Of Air Drawn Through The Venting System, Controlling The Stoves Combustion, Must Be Installed Directly On The Stoves Flue Outlet Where Applicable, When Handle Is In Horizontal Position, The Damper Is Closed, Reducing Combustion, When Handle Is In Vertical Position, The Damper Is Wide Open, No Reduction Of Combustion.
4VP-EL45, 45 Degree Elbow, Used To Offset Pipe Around Construction Obstacles, Factory Sealed At Couplers To Prevent Leakage, Type L Pellet Vent, Fixed Elbow, Improved Performance, Nicer Seams.
VP-VC, 4", Vertical Termination Cap, For Pellet Pipe Installations, Vent Termination For Vertical Thru-The-Roof Installations, Type L Pellet Vent, Provides Necessary Protection Of The Vent System From Rain & Other Elements.
9.5" x 3.75, Black, Deluxe Visor Mirror, Clip On Or 2 Side Tape Included, Clips Onto Visor Or Home Use, Mounts With Pressure Sensitive Tape, Ideal Wherever A Small Mirror Is Needed.
32" x 42", Black, Type 2, Thermal Stove/Wall Board, Floor Protector, Made With Non-Combustible Materials, Complies With ASTM E162 Or ASTM E136.
36" x 52", Black, Type 2, Thermal Stove/Wall Board, Floor Protector, Made With Non-Combustible Materials, Complies With ASTM E162 Or ASTM E136.